NEC Express5800 Series Maintenance Manual page 153

Chapter 2 Useful Features
(b) How to execute Reconstruction
As an example, a case that a new Physical Device is added and 2 Physical Devices of RAID1 are changed to the
Virtual Drives under the environment where the Virtual Drive of RAID0 is being created by using 1 Physical
Device is described.
1. Select "Drive Management" from the HII main menu, and press the <Enter> key.
2. Check that the Physical Device is connected to this RAID controller, with the same capacity and other
specifications as the other Physical Devices, and that the status is "Unconfigured Good".
3. Return to the main menu, select "Virtual Drive Management", and press the <Enter> key.
4. Select the Virtual Drive for which the Reconstruction is performed.
Express5800/B120f Maintenance Guide
4. RAID System Configuration
153