NEC Express5800 Series Maintenance Manual page 92

Chapter 2 Useful Features
(2)
Power Control Configuration Submenu
On Server, choose Power Control Configuration and then press <Enter> key to show its submenus.
Option
AC-LINK
The table below shows the operation when the AC power is turned off once and then back on, in accordance with
the AC LINK setting.
System status before AC power was turned off
Operating (DC power is ON)
Abort (DC power is Off)
Forced shutdown*
* Continue pressing POWER Switch for at least four seconds to forcibly turn off the power.
92
Parameter
Stay Off
[Last State]
Power On

If an uninterruptible power supply (UPS) is used for automatic operation, set the
Tips
AC-LINK to Power On.

The setting of AC-LINK is made valid at the next POST execution.
Express5800/B120f Maintenance Guide
Description
Specifies how the DC power state should be when the AC power
is supplied again after loss of power. See the table below.
AC LINK setting
Stay Off Last State
Off On
Off Off
Off On
1. System BIOS
Power On
On
On
On