NEC Express5800 Series Maintenance Manual page 199

Chapter 3 Appendix
Error Message
B262 Onboard LAN 2 – PCIe Link
Speed Error
B2A1 Mezzanine Slot 1 - PCIE Link
Speed Error
B2A2 Mezzanine Slot 2 - PCIE Link
Speed Error
B2A3 Mezzanine Slot 3 - PCIE Link
Speed Error
B2A4 Mezzanine Slot 4 - PCIE Link
Speed Error
B2A8 PCI Slot - PCIE Link Speed
Error
B2AA I/O Blade PCI Slot - PCIE Link
Speed Error
B301 Expansion ROM not initialized
- Mezzanine Slot 1
B302 Expansion ROM not initialized
- Mezzanine Slot 2
B303 Expansion ROM not initialized
- Mezzanine Slot 3
B304 Expansion ROM not initialized
- Mezzanine Slot 4
B30A Expansion ROM not initialized
- I/O Blade PCI Slot
B330 Expansion ROM not initialized
- PCI Slot
B341 Mezzanine Slot 1 - PCIE Link
Failure
B342 Mezzanine Slot 2 - PCIE Link
Failure
B343 Mezzanine Slot 3 - PCIE Link
Failure
B344 Mezzanine Slot 4 - PCIE Link
Failure
B348 PCI Slot - PCIE Link Failure
B34A I/O Blade PCI Slot - PCIE Link
Failure
B371 Mezzanine Slot 1 - PCIE Link
Width Error
B372 Mezzanine Slot 2 - PCIE Link
Width Error
B373 Mezzanine Slot 3 - PCIE Link
Width Error
B374 Mezzanine Slot 4 - PCIE Link
Width Error
B378 PCI Slot - PCIE Link Failure
B37A I/O Blade PCI Slot - PCIE Link
Width Error
B3A0 CLP Command Failure
B3A1 EM Failure Pause
C010 The error occurred during
temperature sensor reading
C011 System Temperature out of the
range.
C020 The error occurred during
voltage sensor reading.
C021 System Voltage out of the
range.
C040 SROM data read error
C041 SROM data checksum bad
C061 1st SMBus device Error
detected.
Cause
Link Speed error was detected on
onboard LAN2.
Link Speed error was detected on
Mezzanine Slot 1.
Link Speed error was detected on
Mezzanine Slot 2.
Link Speed error was detected on
Mezzanine Slot 3.
Link Speed error was detected on
Mezzanine Slot 4.
Link Speed error was detected on
PCI Slot PCIE.
Link Speed error was detected on
I/O Blade PCI Slot.
Failed to expand option ROM of
Mezzanine slot 1.
Failed to expand option ROM of
Mezzanine slot 2.
Failed to expand option ROM of
Mezzanine slot 3.
Failed to expand option ROM of
Mezzanine slot 4.
Failed to expand option ROM of I/O
Blade PCI slot.
Failed to expand option ROM of PCI
Slot.
Connection failure of PCIe bus was
detected on Mezzanine Slot 1.
Connection failure of PCIe bus was
detected on Mezzanine Slot 2.
Connection failure of PCIe bus was
detected on Mezzanine Slot 3.
Connection failure of PCIe bus was
detected on Mezzanine Slot 4.
Connection failure of PCIe bus was
detected on PCI Slot.
Connection failure of PCIe bus was
detected on I/O Blade PCI Slot.
Link Width error was detected on
Mezzanine Slot 1.
Link Width error was detected on
Mezzanine Slot 2.
Link Width error was detected on
Mezzanine Slot 3.
Link Width error was detected on
Mezzanine Slot 4.
Connection failure of PCIe bus was
detected on PCIe
Link Width error was detected on I/O
Blade PCI Slot.
CLP Command failed to execute on
BIOS.
CLP Command failed to set on EM.
An error occurred while reading the
temperature sensor.
A temperature abnormality was
detected.
An error occurred while reading the
voltage sensor.
A system voltage abnormality was
detected.
SROM data reading error
SROM checksum error
An error occurred in the 1st SM Bus.
Express5800/B120f Maintenance Guide
1. Error Message of POST and Virtual LCD
Solution
Contact your sales representative.
Disable the expansion of option ROM for
the device that is not used as a boot
device.
Contact your sales representative.
It is possible that a fan has failed or is
clogged. Contact your sales
representative.
Contact your sales representative.
199