Save & Exit - NEC Express5800 Series Maintenance Manual

Chapter 2 Useful Features
1.2.6 Save & Exit
Save & Exit menu appears when the cursor is moved to Save & Exit.
The options of this menu are described below.
(a) Save Changes and Exit
SETUP closes with all the changes saved in Non-volatile RAM (NVRAM). After closing SETUP, the system
automatically restarts.
(b) Discard Changes and Exit
SETUP closes without saving the changes and returns to the previous BIOS settings. After closing SETUP,
the system automatically restarts.
(c) Save Changes and Power Off
The SETUP utility closes with all the changes saved in NVRAM.
After the SETUP utility closes, the power of the server is automatically turned off.
(d) Discard Changes and Power Off
The SETUP utility closes without saving the changes in NVRAM. The setting at startup of SETUP utility is
retained.
After the SETUP utility closes, the power of the server is automatically turned off.
(e) Load Setup Defaults
This option resets all settings in SETUP to the default settings.
96

Factory settings are subject to change from the default settings depending on the server
Note
model. The settings must be corrected according to your hardware/software
environment by referring to the list of settings in this section.

The values of iSCSI Configuration submenu and UEFI Driver Configuration submenu
do not return to the default value.
Express5800/B120f Maintenance Guide
1. System BIOS