Using Iscsi - NEC Express5800 A2040b Configuration Manual

CONFIGURATION GUIDE
◆Linux Bonding
Network Interface
NE3304-138/-132/-133
(1000BASE-T)
NE3304-128
(10GBASE-SR)
NOTE:

Teaming between 1000BASE-T card and 10GBASE-SR card: Not supported

Concatct to our sales representative for other than Active-backup

Can mix 1000BASE-T bonding and 10GBASE-SR bonding within one system

6.2 Using iSCSI

Please refer to iStorage web site regarding the connection to iStorage Series via iSCSI, and to
EXPRESSCLUSTER web site for cluster configuration.
See the table below for supported network interface and OS combinations.
Network Interface
10GbE
RHEL : Red Hat Enterprise Linux
NOTE:

NIC Teaming/Bonding features are not supported on iSCSI interfaces.

When booting OS by iSCSI, please select IPv4 for network settings.
NEC Corporation
–
NEC Express5800/A2040b, A2020b, A2010b, A1040b
Operation Mode
Recommend:
active-backup
(fault-tolerance)
Recommend:
active-backup
(fault-tolerance)
Operating System
NE3304-128
Windows Server 2008 R2 SP1/ Windows Server 2012 / Windows Server
2012 R2 /RHEL / VMware
Revision 7.0 – December 2014
Configuration
 
2 ports in one card

2 ports among

multiple cards
 
2 ports in one card

2 ports among

multiple cards
Number of Bonding
Up to 2 ports per one
bonding
Up to 16 teams
Up to 2 ports per one
bonding
Up to 8 teams
39