Chapter 2 Useful Features
5. Select Virtualization Mode and specify parameters.
Parameter
None
NPAR
6. Select Save & Exit to save settings and close the utility.
10.1.2 In Legacy mode
1. Press the <Ctrl> + <S> keys when the following message appears on the POST screen.
Configuration Menu will be launched.
Broadcom NetXtreme Ethernet Boot Agent
Copyright (C) 2000-2012 Broadcom Corporation
All rights reserved.
Press Ctrl-S to enter Configuration Menu
2. From Device List, select a logical port you want to configure.
Single Function mode.
One logical NIC per a port.
NPAR mode.
NIC can be divided into up to four logical partitions per a port.
Tips
Press the <Ctrl> key, and then press the <S> key.
If the following screen does not appear, restart the server and press the <Ctrl> + <S>
keys again.
Express5800/B120f Maintenance Guide
Description
10. Advanced LAN Configuration
181