NEC Express5800 Series Maintenance Manual page 80

Chapter 2 Useful Features
Option
Target IP Address
Target Port
Boot LUN
Authentication Type
CHAP Type
CHAP Name
CHAP Secret
CHAP Status
Reverse CHAP Name
Reverse CHAP Secret
Reverse CHAP Status
Save Changes
Back to Previous Page
80
Parameter
IP Address Specifies the IP address of the target device.
This item is not displayed when Enabled is selected for Get
Target info via DHCP.
0-65535 Specifies the target port.
This item is not displayed when Enabled is selected for Get
Target info via DHCP.
Up to 20 alphanumeric Specifies the LUN.
characters
This item is not displayed when Enabled is selected for Get
Target info via DHCP.
CHAP Specifies the authentication type.
[None]
One Way Specifies the CHAP type.
[Mutual] This item is displayed when CHAP is selected for
Authentication Type.
Up to 126 alphanumeric Specifies the CHAP name.
characters
This item is displayed when CHAP is selected for
Authentication Type.
alphanumeric Specifies the CHAP secret.
characters between 12
This item is displayed when CHAP is selected for
and 16 digits
Authentication Type.
(Display only) Displays the status of the CHAP secret.
This item is displayed when CHAP is selected for
Authentication Type.
Up to 126 alphanumeric Specifies the reverse CHAP name.
characters
This item is displayed when CHAP is selected for
Authentication Type and Mutual is selected for CHAP Type.
Alphanumeric Specifies the reverse CHAP secret.
characters between 12
This item is displayed when CHAP is selected for
and 16 digits
Authentication Type and Mutual is selected for CHAP Type.
(Display only) Displays the status of the reverse CHAP secret.
This item is displayed when CHAP is selected for
Authentication Type and Mutual is selected for CHAP Type.
– Saves the current settings.
– Returns to the iSCSI Configuration submenu.
Express5800/B120f Maintenance Guide
1. System BIOS
Description
[ ]: Factory setting