NEC Express5800 Series Maintenance Manual page 50

Chapter 1 Maintenance
Move the cursor to the test that detected the error, and press <Enter > key. Take notes about the error
message that has been output to the Detail Information screen and contact your sales representative.
4. Follow the guideline shown at the bottom of the screen, and press <Esc> key.
Enduser Menu below appears.
<Test Result>
Shows the diagnostics completion screen of the above diagnostics.
<Device List>
Shows a list of connected devices.
<Log Info>
Shows the log information of the diagnostics.
To save it, connect FAT formatted removable media, and then choose Save(F).
<Option>
Optional features can be used from this menu.
<Reboot>
Restarts the server.
5. Choose Reboot in Enduser Menu.
The server restarts. Remove EXPRESSBUILDER DVD from the drive.
System Diagnostics is now completed.
50
Express5800/B120f Maintenance Guide
8. System Diagnostics