Collecting Failure Information; Collecting Event Logs; Windows Server 2012 R2 / Server 2012 - NEC Express5800 Series Maintenance Manual

Chapter 1 Installing Windows
4.

Collecting Failure Information

If the server does not work correctly, you can collect failure information by using the following way.
The failure information to be described below is to be collected only at the request of your sales representative.
4.1

Collecting Event Logs

To collect the various event logs of the server, follow the steps below.

4.1.1 Windows Server 2012 R2 / Server 2012

1. Click Settings from Charms bar.
To go to step 4, you can directly choose Event Viewer by right-clicking on the lower left corner of the
screen.
2. Click Control Panel under Settings.
Important Do not reset during dumping memory or restarting even if the message of
virtual memory shortage appears.
Tips
If a STOP error, system error, or system stall occurs, restart the system and follow
the steps below.
Settings
Express5800/B120f Maintenance Guide
4. Collecting Failure Information
Event Viewer
19