Table of Contents
Advertisement
Chapter 2 Useful Features
5.
RAID System Configuration
This section describes the LSI Software RAID Configuration Utility and Off-line Utility. The LSI Software RAID
Configuration Utility resides in LSI Software RAID and is an OS-independent program.
5.1
Running LSI Software RAID Configuration Utility in the Legacy
Mode
On the POST screen after power-on, press the <Ctrl>+<M> key or <Enter> key when the following message
appears. The LSI Software RAID Configuration Utility starts.
Press Ctrl-M or Enter to run LSI Software RAID Configuration Utility
Configure
Initialize
Objects
Rebuild
Check Consistency
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
*1: "x" in LSI Software RAID Configuration Utility Verx.xx represents the version of utility.
*2: mm dd, yyy represents created date.
*3: "z" in BIOS Version z.zz.zzzzzzzz represents the version of LSI Software RAID BIOS.
130
If you fail to press <Ctrl>+<M> keys or <Enter> key, or the system proceeds without
Tips
displaying the following screen, restart the system, and press <Ctrl>+<M> keys on POST
screen.
LSI Software RAID Configuration Utility Ver x.xx mm dd, yyyy
BIOS Version z.zz.zzzzzzzzz
Management Menu
Configure VD(s)
Express5800/R120g-2E, T120g Maintenance Guide
5. RAID System Configuration
Advertisement
Table of Contents
