Chapter 2 Useful Features
5. Select Multi-Function Mode and specify parameters.
Parameter
SF
NPAR
6. Select Save & Exit to save settings and close the utility.
11.1.2
In Legacy mode
1. Press <Ctrl> + <S> keys when the following message appears on the POST screen.
Configuration Menu will be launched.
QLogic Ethernet Boot Agent
Copyright (C) 2014 QLogic Corporation
All rights reserved.
Press Ctrl-S to enter Configuration Menu
2. From Device List, select a logical port you want to configure.
Single Function mode.
One logical NIC per a port.
NPAR mode.
NIC can be divided into up to four logical partitions per a port.
Note
NPAR mode is supported only on 64-bit OS.
•
Tips
Press <Ctrl> key first, then press <S> key.
•
If the following screen does not appear, restart the server and press <Ctrl> + <S> keys
again.
Express5800/B120g-h Maintenance Guide
Description
11. Advanced LAN Configuration
129