Avaya J100 Series Installing And Administering page 83

Parameter name
PHNCC
PHNDPLENGTH
PHNIC
PHNLD
PHNLDLENGTH
PHNOL
Note:
• The parameter values must be relevant to the location of the Avaya Media Server where
the IP phones are registered. For example, if a phone is in Japan and its media server is
in the United States, set the PHNCC value to 1 for the United States.
• The digits the phones insert and dial are subject to standard Avaya Media Server
features and administration. This includes Class of Service (COS), Class of Restriction
(COR), Automatic Route Selection (ARS), and so on.
• Phones will not insert the expected digits when calling back from call history or contacts
list if the configured SIP user extension is equal to or longer than the number stored in
the call history.
July 2019
Default value
1
5
011
1
10
9
Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
Description
Specifies the international country code of the
Communication Manager call server. For
example, 1 for the United States, 44 for the
United Kingdom, and so on.
Valid values are from 1 to 999.
Specifies the internal dial plan number length.
For example, if the extension number is 12345,
then the dial plan length is 5.
This value must match the extension length set
on your call server.
Valid values are from 3 to 13.
Specifies the international access code.
Valid values are from 0 to 4 characters such as
numbers 0–9, and special symbols such as star
key (*), and pound key (#).
Specifies long distance access code.
Valid values are from 0 through 9 and empty
string.
Specifies the maximum length, in digits, of the
national telephone number for the country in
which the Communication Manager call server is
located.
For example, 800-555-1111 has a length of 10.
Valid values are from 5 to 15.
Specifies the outside line access code.
Valid values are from 0 to 2 characters such as
numbers 0–9, and special symbols such as star
key (*), and pound key (#).
Phone configuration
83