Backup Failed; Restore Process; User Profile Backup On Personal Profile Manager (Ppm); User Profile Parameters For Backup - Avaya J100 Series Installing And Administering

Backup and restore
• Sends the backup file to the server.
If the automatic backup process fails, the phone displays the following message:

Backup Failed

Note:
The default value of the credentials and realm are set to null in the following cases:
• At the time of manufacturing.
• When the phone is reset to factory default.
• When user-specific data is removed from the phone.
• Backup process is only initiated when there is a successful retrieval of the user-specific
data.

Restore process

• HTTP server requests the file.
• The phone sends the backup file.
• HTTP server returns the file to the phone.
If the automatic restore process fails, the phone displays the following message:
Retrieval Failed

User profile backup on Personal Profile Manager (PPM)

Phone supports data backup by saving all non-volatile user parameters on PPM . When the user
logs in to any registered device, PPM restores all user data on the device.
Note:
PPM is only available in an Avaya Aura

User profile parameters for backup

The following table lists the parameters that are backed up on Personal Profile Manager (PPM).
Parameter
CLICKS
OUTSIDE_CALL_RING_TYP
E
July 2019
®
environment.
Default Description
value
1 Specifies if the phone button can generate click sounds.
1 Specifies the default outside call ring type.
Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
Table continues...
214