Initial setup and connectivity
2. Place the expansion module bracket on one level to the right of the phone bracket, drill
holes, and then affix the #8 screws.
3. Attach the Avaya J100 Expansion Module to the wall mount bracket by inserting the upper
tab of the wall mount bracket into the slot on the back of the expansion module.
4. Attach the phone to the wall mount bracket. See
more details.
Related links
Wall mounting the phone
July 2019
on page 23
Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
Wall mounting the phone
on page 23 for
26