Avaya J100 Series Installing And Administering page 127

Name
Dial Plan
No Digit Dial Timer
Inter-digit Wait Timer
Dial Local Area Code
Local Area Code
Enhanced Local Dialing Rules
Enable Local Dialing Rules
Country Code
International Access Code
July 2019
Description
Specifies the dial plan used in the phone.
Value format: a sting of 0 to 1023 characters without any
intervening spaces.
The default value is empty.
Specifies the time in seconds during which the phone waits for
a digit to be dialed after going off-hook and before generating a
warning tone.
The valid value is an integer from 0 to 60. The default value is
20 seconds.
Specifies the time in seconds during which phone waits after a
digit is dialed before sending a SIP INVITE.
The valid value is an integer from 0 to 10. The default value is 5
seconds.
Specifies whether the user must dial the area code of calls
within the same area code regions.
The options are:
• No (default)
• Yes
Indicates the phone local area code which allows the user to
dial local numbers with more flexibility.
The valid value is a sting of 5 digits ranged from 0 to 9. The
default value is empty.
Specifies whether the algorithm defined by parameters in this
section is used during certain dialing procedures.
The options are:
• Disable
• Enable without Contacts (default)
• Enable with Contacts
Specifies the country code of the phone.
The valid value is an integer from 1 to 999. The default value is
1.
Specifies the international access code.
The valid value is up to 4 dialable characters. The default value
is 011.
Value format: digits from 0 to 9, *, #.
Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
Phone configuration
Table continues...
127