Avaya J100 Series Installing And Administering page 278

Customizable parameters
Parameter name
OCSP_URI
OCSP_URI_PREF
OCSP_USE_CACHE
OPUS_PAYLOAD_TYPE
OUTBOUND_SUBSCRIPTION_REQUEST_DURATI
ON
P
July 2019 Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
Default Description
value
Null Specifies the URI of an OCSP
responder. The URI can be an IP
address or hostname. Valid values
contain 0 to 255 ASCII characters,
zero or one URI.
1 Specifies the preferred URI for use
in an OCSP request when more
than one source is available.
Value operation:
• 1: Use the OCSP_URI and then
the OCSP field of the Authority
Information Access (AIA)
extension of the certificate.
• 2: Use the OCSP field of the
Authority Information Access
(AIA) extension of the certificate
and then the OCSP_URI.
1 Specifies that the OCSP caching is
in use.
Value operation:
• 0: OCSP is not used. Always
check with OCSP responder.
• 1: OSCP cache caching is used.
116 Dynamically specifies the RTP
payload type to be used for OPUS
codec. The parameter is used when
the media request is sent to the far-
end in an INVITE or 200 OK when
INVITE with no Session Description
Protocol (SDP) is received. The
range is between 96 to 127.
86400 Specifies the duration in seconds
requested by the phone in
SUBSCRIBE messages, which can
be decreased depending on the
response from the server.
Valid values are 60 through
31536000 (one year). The default
value is 86400 (one day).
Table continues...
278