Avaya J100 Series Installing And Administering page 291

Parameter name
QLEVEL_MIN
R
RDS_INITIAL_RETRY_ATTEMPTS
RDS_INITIAL_RETRY_TIME
July 2019 Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
List of configuration parameters
Default Description
value
1 Specifies the minimum quality level
for which a low local network quality
indication will not be displayed.
Value operation:
• 1: Never display icon (default)
• 2: Packet loss is > 5% or round
trip network delay is > 720ms or
jitter compensation delay is >
160ms.
• 3: Packet loss is > 4% or round
trip network delay is > 640ms or
jitter compensation delay is >
140ms.
• 4: Packet loss is > 3% or round
trip network delay is > 560ms or
jitter compensation delay is >
120ms.
• 5: Packet loss is > 2% or round
trip network delay is > 480ms or
jitter compensation delay is >
100ms.
• 6: Packet loss is > 1% or round
trip network delay is > 400ms or
jitter compensation delay is >
80ms.
15 Specifies the number of retries after
which the phone abandons its
attempt to contact the PPM server.
Valid values are 1 through 30.
2 Specifies the number of seconds
that the phone waits for the first
time before trying to contact the
PPM server again after a failed
attempt. Each subsequent retry is
delayed by double the previous
delay.
Valid values are 2 through 60.
Table continues...
291