Phonekey Parameter Values - Avaya J100 Series Installing And Administering

Parameter Name
WLAN_DSCPAUD
WLAN_L2QSIG
SET WLAN_DSCPSIG

PHONEKEY parameter values

This section contains the full list of PHONEKEY parameter values and their definition.
The common syntax for the PHONEKEY parameter is the following:
SET PHONEKEY "Key=1;Type=feature;Name=autocallback;forced"
where
Type and Name can take other values. For the full list of allowed values, refer to the table below.
For additional settings of the PHONEKEY parameter and the details on its syntax, refer to the
Additional parameters column.
PHONEKEY Allowed values
setting
Feature autocallback
(Type=featu
prioritycall
re)
whisperpage
callpark
callunpark
callpickup
callpickupext
callpickupdir
July 2019
Default Value
46
3
34
Definition
Automatic Call Back
Priority Call
Whisper Paging
Call Park
Call Unpark
Call Pickup
Call Pickup
Extended
Call Pickup Directed
Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
PHONEKEY parameter values
Description
Specifies the layer 3
Differentiated Services (DiffServ)
Code Point for audio frames
generated by the telephone.
Valid value is from 0 to 63.
Specifies the layer 3
Differentiated Services (DiffServ)
Code Point for audio frames
generated by the telephone.
Valid value is from 0 to 63.
Specifies the layer 3
Differentiated Services (DiffServ)
Code Point for signaling frames
generated by the telephone.
Valid value is from 0 to 63.
Additional parameters
Table continues...
323