Administering Display Language Options - Avaya J100 Series Installing And Administering

Phone configuration
3. Press Enter.
4. Select Reset to defaults.
5. Press Reset when the phone prompts for confirmation.
The phone resets from the beginning of registration, which might take a few minutes. The
phone resets all settings to the defaults except user data stored remotely , for example:
user data stored in PPM or on an external server specified by USER_STORE_URI
parameter.
After reset, the phone displays the Log In screen.
Note:
To reset the phone default value when both phone and web admin passwords are lost,
press the key in sequence of 'Mute button' '<phone mac address>' ' #'. In the MAC
address, '2' is mapped to a, b, c and '3' is mapped to d, e, f.
For example, if the phone MAC address is A0:09:ED:05:80:51, the key sequence is
'Mute 200933058051 #'.
This is applicable to the phones in an Open SIP environment only.
Note:
Avaya J100 Series IP Phones parameters stored for a particular user are not reflected in
other phones, for example, it is not reflected in 9600 Series IP Deskphones, even if the SIP
user is the same.
Related links
Configuring the phone using Administration menu

Administering display language options

By default, the phone display information is in English. Administrators can specify up to four
languages for each phone to replace English. Users can then select the display language.
The actual character input method does not depend on the languages available from the software
download. If the phone does not support a character input method, use ASCII instead.
However, the user can change the language of the deskphone and can choose any of the
following languages:
• Arabic
• Dutch
• English
• French (Canada)
• French (France)
• German
July 2019 Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
on page 74
90