Avaya J100 Series Installing And Administering page 60

Servers, VLAN, and IP configuration
Parameter name
L2QVLAN
PHY2VLAN
L2QAUD
July 2019
Default value
0
0
6
Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
Description
Specifies the voice VLAN ID to be used by IP
phones.
Valid values are 0 through 4094.
L2QVLAN is configured through:
• Local admin procedure
• A name equal to value pair in DHCPACK
message
• SET command in the Settings file
• DHCP option 43
• LLDP
Specifies the value of the 802.1Q VLAN ID that
is used to identify network traffic going into and
coming out of the internal CPU of the phone.
Valid values are 0 through 4094.
PHY2VLAN is configured through:
• SET command in the Settings file
• LLDP
Specifies the value of the VLAN priority portion of
the VLAN tag when the phone generates tagged
Ethernet frames from the internal CPU of the
phone. These values are inserted into the VLAN
tag for audio frames (RTP, RTCP, SRTP,
SRTCP). All other frames except those specified
by the L2QSIG parameter are set to priority 0.
Valid values are 0 through 7.
L2QAUD is configured through:
• SET command in the Settings file
• LLDP
Table continues...
60