Administration Methods; Precedence Of Administration Methods - Avaya J100 Series Installing And Administering

Initial setup and connectivity
• If applicable, Avaya Aura
• If applicable, Avaya Aura
• If applicable, IP Office IPO 11.0.0 or later
• A DHCP server for providing dynamic IP addresses to the Avaya J100 Series IP Phones.
• A file server, an HTTP, HTTPS, or the Avaya Aura
software distribution package and the settings file
IPv6 deployment requires Avaya Aura
Communication Manager v7.1 or later, Avaya Aura
®
Aura Session Border Controller v7.1 or later. For more information about installing and
configuring the components, see their respective documentation.

Administration methods

You can use the following methods to administer the devices. The following table lists the
configuration parameters that you can administer through each of the corresponding methods.
Method
DHCP
LLDP
Settings file
®
Avaya Aura System Manager and IP
Office
Administration menu on the phone
Web UI

Precedence of administration methods

Most of the parameters are configured through multiple methods. If you configure a parameter
through more than one method, the device applies the settings of the method that has a higher
precedence. The following list shows the precedence of the methods in the highest to lowest
order:
1. Administration menu on the phone. When the parameter USE_DHCP is set to 1, the phone
gets the DHCP values from the DHCP rather than Administration menu of the phone.
2. Administering the phone from the web UI.
3. Avaya Aura
July 2019
®
Presence Services 6.2.4 or later
®
Session Border Controller 7.0 or later
®
Session Manager v7.1 or later, Avaya Aura
IP
addresses
—
—
—
®
System Manager and IP Office.
Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
®
Utility Services for downloading the
®
System Manager v7.1 or later, and Avaya
Can administer
Tagging Network
and VLAN Time
Server
—
— —
—
®
Quality of Application-
Service specific
parameters
—
—
—
—
30