Avaya J100 Series Installing And Administering page 110

Phone configuration
Name
SIP User ID
Authentication User ID
Authentication Password
SIP Global Settings
SIP Domain
Enable PPM as source of
Proxy Server
July 2019
Description
Specifies the SIP user ID used to log in to the phone.
You can also type the SIP user ID, which is a combination of the following
values:
• Upper and lower case characters.
• Numbers from 0 to 9.
• Spaces.
• Special characters. The allowed characters are the following: . , : ; "" '' / ()
{} [] ` ~ * _ ! ? + - ^ # = <> | & $ —
The default value is empty.
Specifies the authentication ID.
You can also type the authentication user ID in this field if authentication is
enabled on the SIP server.
The authentication user ID is a combination of the following values:
• Upper and lower case characters.
• Numbers from 0 to 9.
• Spaces.
• Special characters. The allowed characters are the following: . , : ; "" '' / ()
{} [] ` ~ * _ ! ? + - ^ # = <> | & $ —
Specifies the authentication password.
You can also type the password in this field if authentication is enabled on
the SIP server.
Note:
The password can contain maximum 31 ASCII characters.
The default value is empty.
Specifies the SIP domain used for SIP registration.
The valid value is a string of 0 to 255 ASCII characters.
Specifies whether PPM is used as a source of SIP proxy server
information.
Note:
This is an Avaya Aura
environment.
The options are:
• Yes (default)
• No
Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
®
setting which is ignored in an Open SIP
Table continues...
110