Avaya J100 Series Installing And Administering page 261

Parameter name
HEADSYS
HOMEIDLETIME
HTTPEXCEPTIONDOMAINS
HTTPPORT
July 2019 Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
List of configuration parameters
Default Description
value
0 Specifies whether the phone goes
on-hook if the headset is active
when the disconnect message is
received.
Value operation:
• 0: The phone goes on-hook if the
disconnect message is received
when the headset is active.
• 1: Disconnect messages are
ignored when the headset is
active. This is used for Call
Center setting.
10 Specifies the number of minutes of
idle time after which the Home
screen is displayed.
Valid values are 0 through 30.
A value of 0 means that the Home
screen is not displayed
automatically when the phone is
idle.
Note:
Only Avaya J129 IP Phone
supports this feature.
Null Specifies a list of one or more
domains, separated by commas
without any intervening spaces, for
which HTTPPROXY is not used.
The value can contain 0 to 255
characters. The default value is
null.
80 Sets the TCP port used for HTTP
file downloads from non-Avaya
servers.
Values range from 0 to 65535.
Table continues...
261