Avaya J100 Series Installing And Administering page 314

Customizable parameters
Parameter name
USE_CONTACT_IN_REFERTO
USE_EXCHANGE_CALENDAR
USER_STORE_URI
UUIDISPLAYTIME
V
July 2019 Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
Default Description
value
1 Specifies which transfer target
address should be used in Refer-To
a header of REFER SIP request on
attended transfer.
Value operation:
• 0: Use CONTACT URI of the
transfer target in Refer-To header
of REFER SIP request.
• 1: Use TO URI of the transfer
target in Refer-To header of
REFER SIP request.
0 Specifies whether the Calendar
synchronizes with the Microsoft
Exchange.
Value operation:
• 0: To disable synchronization.
• 1: To enable synchronization.
Specifies the URI path of IP Office
for storing user data.
Note:
If the value of this parameter is
set to null, then the addition,
deletion, and modification of
Contacts is disabled.
10 Specifies the duration, in seconds,
that the UUI Information screen is
be displayed.
Valid values are 5 through 60.
Table continues...
314