Configuring Ethernet Settings - Avaya J100 Series Installing And Administering

Phone configuration
Name
HTTPS Listen Port
Use certificate for Web Server
Related links
Configuring network settings

Configuring Ethernet settings

About this task
Avaya J100 Series IP Phones display the details of the configuration fields in the Description
section of the screen.
Procedure
1. Log in to the web interface as an administrator.
2. In the navigation pane, click Ethernet.
3. Configure the following areas:
• IP Configuration
• IPv4 Configuration
• IPv6 Configuration
• 802.1X Supplicant Operating Mode
• VLAN
• QoS
• LLDP
• Ethernet Interface
4. Click one of the following:
• Save: To save the configuration changes.
• Reset to Default: To revert to the default values.
Related links
Configuring the phone using the web interface
Ethernet settings field descriptions
July 2019
on page 95
on page 92
on page 99
Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
Description
Specifies the port number of the web server when
the web interface is accessed using HTTPS.
The valid value range is from 443 to 65535. The
default port number is 443.
The valid value is an integer from 443 to 65535.
Specifies which server certificate will be used when
the web interface is accessed using HTTPS.
The options are:
• Factory Certificate (default)
• Custom Certificate
98