Network Settings Field Description - Avaya J100 Series Installing And Administering

Phone configuration
• Web Server
4. Click one of the following:
• Save: To save the configuration changes.
• Reset to Default: To revert to the default values.
Related links
Configuring the phone using the web interface

Network settings field description

Network settings field description
Name
Network
Network Mode of Operation
DNS
DNS Server
DNS Domain
ICMP
Destination Unreachable Message Control
July 2019
on page 92
on page 96
Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
Description
Specifies the network mode used by the phone.
The operations are:
• Ethernet only
• Ethernet (preferred, but manual override
allowed from Phone UI) (default)
• Wi-Fi (preferred, but manual override allowed
from Phone UI)
Specifies the IP addresses of the DNS servers
added to the network.
Valid value is IP addresses in dotted-decimal
format, separated by commas without any
intervening spaces.
The default value is empty.
Note:
You can add up to 16 DNS servers.
Specifies the domain name of the DNS server.
Valid value must be in the DNS name format. The
default value is empty.
Specifies the type of the ICMP destination
unreachable messages.
The options are:
• No
• Limited Port Unreachable messages (default)
• Protocol and Port Unreachable messages
Table continues...
96