Customizable parameters
Parameter name
SCREENSAVER_IMAGE_SELECTABLE
SCREENSAVERON
SDPCAPNEG
July 2019
Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
Default
Description
value
1
Allows the end user to select and
change the screen saver images.
Value operation:
• 0: End user can not select and
change the screen saver images
from the settings menu.
• 1: End user can select and
change the screen saver images
from the settings menu.
Note:
Only Avaya J169/J179 IP
Phone supports this feature.
240 (4
Specifies the number of minutes of
hours)
idle time after which the screen
saver is displayed.
If an image file is downloaded
based on the LOGOS and
CURRENT_LOGO parameter, it is
used as the screen saver.
Otherwise, the built-in Avaya one-
X(TM) screen saver is used.
Valid values are 0 through 999. The
default value is 240 (4 hours).
A value of 0 means that the screen
saver will not be displayed
automatically when the phone is
idle.
1
Specifies if SDP capability
negotiation is enabled.
Value operation:
• 0: SDP capability negotiation is
disabled.
• 1: SDP capability negotiation is
enabled.
Table continues...
298