Avaya J100 Series Installing And Administering page 251

Parameter name
ENABLE_RECORDING
ENABLE_REDIAL
ENABLE_REDIAL_LIST
ENABLE_REMOVE_PSTN_ACCESS_PREFIX
July 2019 Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
List of configuration parameters
Default Description
value
0 Specifies if audio debug recording
is enabled for users.
Value operation:
• 0: Audio debug recording is
disabled.
• 1: Audio debug recording is
enabled.
Specifies if Redial softkey is
available.
Value operation:
• 0: No
• 1: Yes
Specifies if the phone redials last
number or displays list of recently
dialed numbers.
Value operation:
• 0: Last number redial
• 1: User can select between the
last redialled number and the
redial list.
•
Note:
Avaya J139 IP Phone does not
support this feature.
Allows phone to perform digit
manipulation during failure
scenarios. This parameter allows
removal of PSTN access prefix
from the outgoing number.
Value operation:
• 0: PSTN access prefix is retained
in the outgoing number.
• 1: PSTN access prefix is removed
from the outgoing number.
Table continues...
251