Avaya J100 Series Installing And Administering page 252

Customizable parameters
Parameter name
ENABLE_SHOW_EMERG_SK
ENABLE_SHOW_EMERG_SK_UNREG
July 2019 Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
Default Description
value
2 Specifies whether an Emergency
softkey, with or without a
confirmation screen, is displayed
when the phone is registered. All
emergency numbers are always
supported.
Value operation:
• 0: Emergency softkey is not
displayed.
• 1: Emergency softkey is
displayed without a confirmation
screen.
• 2: Emergency softkey is
displayed with a confirmation
screen.
Note:
The parameter is set to 0 for
IP Office environment.
2 Specifies whether an Emergency
softkey, with or without a
confirmation screen, is displayed
when the phone is not registered.
All emergency numbers will always
be supported.
Value operation:
• 0: Emergency softkey is not
displayed.
• 1: Emergency softkey is
displayed without a confirmation
screen.
• 2: Emergency softkey is
displayed with a confirmation
screen.
Note:
The parameter is set to 0 for
IP Office environment.
Table continues...
252