Avaya J100 Series Installing And Administering page 107

Name
WEP Key 2
WEP Key 3
WEP Key 4
WPA2 Enterprise (802.1x)
EAP Authentication Method
EAP Phase 2 Authentication Method
July 2019
Description
Specifies the WEP key values for the Wi-Fi network.
The valid value is up to 26 alphanumeric characters that can be
the following:
• Blank
• 0 – 9
• A – F
The value must include 10 hexadecimal digits for 64 bit keys
and 26 hexadecimal digits for 128 bit keys. The default value is
empty.
Specifies the WEP key values for the Wi-Fi network.
The valid value is up to 26 alphanumeric characters that can be
the following:
• Blank
• 0 – 9
• A – F
The value must include 10 hexadecimal digits for 64 bit keys
and 26 hexadecimal digits for 128 bit keys. The default value is
empty.
Specifies the WEP key values for the Wi-Fi network.
The valid value is up to 26 alphanumeric characters that can be
the following:
• Blank
• 0 – 9
• A – F
The value must include 10 hexadecimal digits for 64 bit keys
and 26 hexadecimal digits for 128 bit keys. The default value is
empty.
Specifies the type of EAP authentication method.
The options are:
• PEAP (default)
• TLS
Specifies the type of EAP Phase 2 authentication method.
The options are:
• None (default)
• MSCHAPV2
Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
Phone configuration
Table continues...
107