Avaya J100 Series Installing And Administering page 101

Name
Privacy SLAAC Mode
SLAAC Addresses
802.1X Supplicant Operating Mode
Supplicant Operating Mode
802.1x Pass-through
Operating Mode
Authentication Method
VLAN
VLAN
July 2019
Description
Specifies the preference for Privacy Extensions in SLAAC.
The options are:
• Disabled, stable address generated from MAC
• Stable private address (default)
• Temporary address
SLAAC (stateless auto configuration) IPv6 addresses.
Value format: eight groups of four hexadecimal digits. The default value
is null.
Specifies the 802.1X supplicant operating mode.
The options are:
• Disable (default)
• Enable (responds only to unicast EAPOL messages)
• Enable (responds to unicast and multicast EAPOL messages)
Specifies the 802.1X pass-through operating mode.
Pass-through refers to the forwarding of EAPOL frames between the
phone's Ethernet line interface and the secondary PC Ethernet
interface.
The options are:
• Without proxy logoff (default)
• With proxy logoff
• Disabled
Specifies the authentication method to be used by 802.1X.
The options are:
• MD5 (default)
• TLS
Specifies whether the VLAN tagging is enabled or disabled.
The options are:
• Auto (default): To support VLAN functionality by using the phone
network.
• On: To support the VLAN functionality by using the internal switch of
the phone.
• Off: To disable the VLAN functionality of the phone.
Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
Phone configuration
Table continues...
101