Avaya J100 Series Installing And Administering page 292

Customizable parameters
Parameter name
RDS_MAX_RETRY_TIME
RECORDINGTONE
RECORDINGTONE_INTERVAL
July 2019 Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
Default Description
value
600 Specifies the maximum delay
interval in seconds after which the
phone abandons its attempt to
contact the PPM server.
Valid values are 2 through 3600.
0 Specifies whether call recording
tone is generated on active calls.
Value operation:
• 0: Call recording tone is not
generated (default).
• 1: Call recording tone is not
generated.
15 Specifies the number of seconds
between call recording tones.
Valid values are 1 through 60.
Table continues...
292