Post Installation Checklist - Avaya J100 Series Installing And Administering

Initial setup and connectivity
3. The initialization procedure consists of the following processes:
a. The phone checks for LLDP messages.
b. The phone sends a DHCP DISCOVER message to discover the DHCP server in the
network and invokes the DHCP process.
If the phone does not receive a provisioning server address from the configuration
setup, the phone displays the Configure Provision Server screen.
c. In the Configure Provision Server screen, press the Config softkey and enter the
address of the provisioning server. The provisioning server address can be in the form
of IP address or a Fully Qualified Domain Name (FQDN). To enter the dot symbol (.)
in the field, press the alphanumeric softkey to toggle to the alphanumeric mode.
d. The phone verifies the VLAN ID, and starts tagging the data and voice packets
accordingly.
e. The phone queries the HTTP server directory defined by HTTPDIR, to find the
upgrade and the Settings file. If the files cannot be found, the phone reverts to
looking into the root directory of the HTTP server.
f. The phone gets the upgrade script file, the Settings file, the language files, and any
firmware updates.
• If configured to use simple certificate enrollment protocol (SCEP), the phone
downloads a valid device certificate.
• The phone displays only the Admin softkey for 15 seconds, and then the Admin
and the Login softkeys.
4. Do one of the following:
• To access the user login screen, press the Login softkey.
• To access the Admin menu, press the Admin softkey and enter the admin menu
password.

Post installation checklist

To ensure that the phone is properly installed and running properly, verify that the following
requirements are complete.
No. Task
1 Has the phone acquired an IP address? N/A
July 2019
Note:
For subsequent restarts, if the user login is automatic and the supplied
credentials are valid, the Login softkey is not displayed.
Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
Reference
Table continues...
36