Avaya J100 Series Installing And Administering page 195

Parameter
MYCERTRENEW
MYCERTWAIT
MYCERTCAID
SCEPPASSWORD
July 2019
Type Default Description
value
Numeric 90 Specifies the percentage used to calculate the renewal
time interval out of the device certificate's Validity Object.
If the renewal time interval has elapsed the phone starts
to periodically contact the SCEP server again to renew
the certificate. The range is from 1 to 99.
Numeric 1 Specifies the behavior of the device when performing
certificate enrolment. assign one of the following values:
• 0: Periodical check in the background
• 1: Wait until a certificate or a denial is received or a
pending notification is received
String CAIdenti Specifies the Certificate Authority Identifier. Certificate
fier Authority servers may require a specific CA Identifier
string in order to accept GetCA requests. If the device
works with such a Certificate Authority, the CA identifier
string can be set through this parameter.
String $SERIA Specifies a challenge password to use with SCEP. The
LNO value of SCEPPASSWORD, if non-null, is included in a
challengePassword attribute in SCEP certificate signing
requests.
If the value contains $SERIALNO, $SERIALNO is
replaced by the value of SERIALNO. If the value contains
$MACADDR, $MACADDR is replaced by the value of
MACADDR without the colon separators.
Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
Configuration for secure installation
195