Server Administration
IAs shown in
DHCPACK setting of parameter
parameter values to the DHCPACK message field and option contents shown.
DHCPACK setting of parameter values
Parameter Value
DHCP lease time
DHCP lease renew time
DHCP lease rebind time
DOMAIN
DNSSRVR
HTTPSRVR
IPADD
LOGSRVR
MTU_SIZE
NETMASK
ROUTER
SNTPSRVR
Since the DHCP site-specific option is processed after the DHCP fields and standard options,
any values set in the site-specific option will supersede any values set via DHCP fields or
standard options, as well as any other previously set values. Values that can be set using the
DHCP site-specific option are listed in
page 65.
Parameters L2Q, L2QVLAN, and PHY2VLAN are not set from a site-specific option if their
values were previously set by LLDP. For more information, see
Protocol
(LLDP).
HTTP Generic Setup
You can store the binary file, upgrade file, and settings file on an HTTP server. With proper
administration, the deskphone seeks out and uses that material. Some functionality might be
70 Deskphone SIP 9608, 9611G, 9621G, 9641G Administrator Guide Release 6.0.1
values, the 9600 Series IP Telephone sets the
Set to
Option #51 (if received).
Option #58 (if received).
Option #59 (if received).
Option #15 (if received).
Option #6 (if received, which might be a list of IP Addresses).
The siaddr field, if that field is non-zero.
The yiaddr field.
Option #7 (if received).
Option #26.
Option #1 (if received).
Option #3 (if received, which might be a list of IP Addresses).
Option #42.
Parameters set by DHCP in a site-specific option
About Link Layer Discovery
on