Table 105: Show Bridge-Ext - Display Description - Edge-Core ECS4620-28P Cli Reference Manual

Default Setting
Disabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
GVRP cannot be enabled for ports set to Access mode using the
command.
Example
Console(config)#interface ethernet 1/1
Console(config-if)#switchport gvrp
Console(config-if)#
show bridge-ext
This command shows the configuration for bridge extension commands.
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show bridge-ext
Console#

Table 105: show bridge-ext - display description

Field
Maximum
Supported VLAN
Numbers
Maximum
Supported VLAN ID
Extended Multicast
Filtering Services
Maximum Supported VLAN Numbers
Maximum Supported VLAN ID
Extended Multicast Filtering Services : No
Static Entry Individual Port
VLAN Version Number
VLAN Learning
Configurable PVID Tagging
Local VLAN Capable
Traffic Classes
Global GVRP Status
Description
The maximum number of VLANs supported on this switch.
The maximum configurable VLAN identifier supported on this switch.
This switch does not support the filtering of individual multicast addresses
based on GMRP (GARP Multicast Registration Protocol).
– 589 –
Chapter 21
| VLAN Commands
GVRP and Bridge Extension Commands
switchport mode
: 4094
: 4094
: Yes
: 2
: IVL
: Yes
: No
: Enabled
: Disabled