Edge-Core ECS4620-28P Cli Reference Manual page 201

show switch stacking
button
show switch stacking
interfaces
2
Console#
This command shows the status of the stacking button.
Command Mode
Privileged Exec
Command Usage
Use the switch stacking button
Example
Console#show switch stacking button
Switch ID Config Status
--------- -------------
1 Y
Console#
This command shows if the stacking ports are up or down.
Command Mode
Privileged Exec
Command Usage
This command will not display any information unless the
command has been used to set the 10G ports to stacking mode.
Example
Console#show switch stacking interfaces brief
Interface Status
--------- ------
Eth 1/25 Down
Eth 1/26 Up
Eth 2/25 Up
Eth 2/26 Up
Eth 3/25 Up
Eth 3/26 Down
Console#show switch stacking interfaces ehternet 2/26
Interface Status
--------- ------
Eth 2/26 Up
Console#
Chapter 4
N
command to set the 10G ports to stacking mode.
Active Status
-------------
Y
– 201 –
| System Management Commands
switch stacking button
Stacking