Edge-Core ECS4620-28P Cli Reference Manual page 333

web-auth
This command defines the limit for failed web authentication login attempts. After
the limit is reached, the switch refuses further login attempts until the quiet time
login-attempts
expires. Use the no form to restore the default.
Syntax
web-auth login-attempts count
no web-auth login-attempts
Default Setting
3 login attempts
Command Mode
Global Configuration
Example
Console(config)#web-auth login-attempts 2
Console(config)#
web-auth
This command defines the amount of time a host must wait after exceeding the
quiet-period limit for failed login attempts, before it may attempt web authentication again. Use
the no form to restore the default.
Syntax
web-auth quiet-period time
no web-auth quiet period
Default Setting
60 seconds
Command Mode
Global Configuration
Example
Console(config)#web-auth quiet-period 120
Console(config)#
count - The limit of allowed failed login attempts. (Range: 1-3)
time - The amount of time the host must wait before attempting
authentication again. (Range: 1-180 seconds)
– 333 –
Chapter 9
| General Security Measures
Web Authentication