Table 136: Mld Filtering And Throttling Commands - Edge-Core ECS4620-28P Cli Reference Manual

MLD Filtering and Throttling
ipv6 mld filter
(Global Configuration)
In certain switch applications, the administrator may want to control the multicast
services that are available to end users. For example, an IP/TV service based on a
specific subscription plan. The MLD filtering feature fulfills this requirement by
restricting access to specified multicast services on a switch port, and MLD
throttling limits the number of simultaneous multicast groups a port can join.

Table 136: MLD Filtering and Throttling Commands

Command
ipv6 mld filter
ipv6 mld profile
permit, deny
range
ipv6 mld filter
ipv6 mld max-groups
ipv6 mld max-groups
action
ipv6 mld query-drop
ipv6 multicast-data-drop
show ipv6 mld filter
show ipv6 mld profile
show ipv6 mld query-drop
show ipv6 mld throttle
interface
This command globally enables MLD filtering and throttling on the switch. Use the
no form to disable the feature.
Syntax
[no] ipv6 mld filter
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
◆
MLD filtering enables you to assign a profile to a switch port that specifies
multicast groups that are permitted or denied on the port. An MLD filter profile
Chapter 24
Function
Enables MLD filtering and throttling on the switch
Sets a profile number and enters MLD filter profile
configuration mode
Sets a profile access mode to permit or deny
Specifies one or a range of multicast addresses for a profile IPC
Assigns an MLD filter profile to an interface
Specifies an M:D throttling number for an interface
Sets the MLD throttling action for an interface
Drops any received MLD query packets
Enable multicast data guard mode on a port interface
Displays the MLD filtering status
Displays MLD profiles and settings
Shows if the interface is configured to drop MLD query
packets
Displays the MLD throttling setting for interfaces
– 719 –
| Multicast Filtering Commands
MLD Filtering and Throttling
Mode
GC
GC
IPC
IC
IC
IC
IC
IC
PE
PE
PE
PE