Table 17: File Directory Information - Edge-Core ECS4620-28P Cli Reference Manual

Chapter 4
| System Management Commands
File Management
unit - Unit identifier. (Range: 1-8)
boot-rom - Boot ROM (or diagnostic) image file.
config - Switch configuration file.
opcode - Run-time operation code image file.
filename - Name of configuration file or code image. If this file exists but
contains errors, information on this file cannot be shown.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
◆
If you enter the command dir without any parameters, the system displays all
files.
◆
A colon (:) is required after the specified unit number.
File information is shown below:

Table 17: File Directory Information

Column Heading
File Name
File Type
Startup
Modify Time
Size
Example
The following example shows how to display all file information:
Console#dir
File Name
-------------------------- -------------- ------- ------------------- ----------
Unit 1:
ECS4620-28T_V1.2.2.26.bix
Factory_Default_Config.cfg
startup1.cfg
-----------------------------------------------------------------------------
Console#
Description
The name of the file.
File types: Boot-Rom, Operation Code, and Config file.
Shows if this file is used when the system is started.
The date and time the file was last modified.
The length of the file in bytes.
Type Startup Modify Time
OpCode Y
Config N
Config Y
Free space for compressed user config files:
– 148 –
Size(bytes)
2000-12-31 00:19:13 18601012
2000-12-31 00:00:32
2000-01-01 02:31:23
65220608
455
2924