Edge-Core ECS4620-28P Cli Reference Manual page 641

show qos map
This command shows ingress CoS/CFI to internal DSCP map.
cos-dscp
Syntax
show qos map cos-dscp interface interface
Command Mode
Privileged Exec
Example
Console#show qos map cos-dscp interface ethernet 1/5
CoS Information of Eth 1/5
CoS-DSCP map.(x,y),x: PHB,y: drop precedence:
CoS
---------------------------------
0
1
2
3
4
5
6
7
Console#
show qos map
This command shows the ingress DSCP to internal DSCP map.
dscp-mutation
Syntax
show qos map dscp-mutation interface interface
Command Mode
Privileged Exec
Command Usage
This map is only used when the QoS mapping mode is set to "DSCP" by the
map trust-mode
interface
ethernet unit/port
unit - Unit identifier. (Range: 1-8)
port - Port number. (Range: 1-28/52)
: CFI 0 1
(0,0) (0,0)
(1,0) (1,0)
(2,0) (2,0)
(3,0) (3,0)
(4,0) (4,0)
(5,0) (5,0)
(6,0) (6,0)
(7,0) (7,0)
interface
ethernet unit/port
unit - Unit identifier. (Range: 1-8)
port - Port number. (Range: 1-28/52)
command, and the ingress packet type is IPv4.
– 641 –
Chapter 22
| Class of Service Commands
Priority Commands (Layer 3 and 4)
qos