Table 19: Show Ip Ospf Database - Display Description - Edge-Core ECS4620-28P Cli Reference Manual

Link State ID
Console#

Table 19: show ip ospf database - display description

Field
OSPF Router
Process with ID
Link State ID
ADV Router
Age
Seq#
CkSum
Link
show ipv6 ospf
This command displays summary information for OSPF interfaces.
interface
Syntax
show ipv6 ospf interface [vlan vlan-id]
Command Mode
Privileged Exec
Example
Console#show ipv6 ospf interface vlan 1
VLAN 1 is up, line protocol is up
Link local Address FE80::200:E8FF:FE93:82A0/64, Area 0.0.0.0
Tag 1, Router ID 192.168.0.2, Network Type BROADCAST, Cost: 1
Transmit Delay is 1 sec, State DR, Priority 1
Designated Router (ID) 192.168.0.2, Interface Address
FE80::200:E8FF:FE93:82A0
No backup designated router on this network
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Neighbor Count is 0, Adjacent neighbor count is 0
Hello received 0 sent 92, DD received 0 sent 0
LS-Req received 0 sent 0, LS-Upd received 0 sent 0
LS-Ack received 0 sent 0, Discarded 0
Console#
AS-external-LSA
ADV Router
Description
OSPF router ID and process ID. The router ID uniquely identifies the router
in the autonomous system. By convention, this is normally set to one of the
router's IP interface addresses.
This field identifies the piece of the routing domain that is being described
by the advertisement.
Advertising router ID
Age of LSA (in seconds)
Sequence number of LSA (used to detect older duplicate LSAs)
Checksum of the complete contents of the LSA
Number of interfaces attached to the router
vlan-id - VLAN ID (Range: 1-4094)
– 1067 –
Chapter 50
Open Shortest Path First (OSPFv3)
Age Seq# CkSum
| IP Routing Commands