Dir; Table 19-7 File Directory Information - Edge-Core ES3528-WDM Management Manual

19
System Management Commands
Command Usage
• If the file type is used for system startup, then this file cannot be deleted.
• "Factory_Default_Config.cfg" cannot be deleted.
Example
This example shows how to delete the test2.cfg configuration file from flash memory.
Console#delete test2.cfg
Console#
Related Commands

dir (19-16)

delete public-key (21-20)
dir
This command displays a list of files in flash memory.
Syntax
dir {{boot-rom: | config: | opcode:} [filename]}
The type of file or image to display includes:
• boot-rom - Boot ROM (or diagnostic) image file.
• config - Switch configuration file.
• opcode - Run-time operation code image file.
• filename - Name of configuration file or code image. If this file exists but
contains errors, information on this file cannot be shown.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
• If you enter the command dir without any parameters, the system displays all
files.
• File information is shown below:
Column Heading
file name
file type
startup
size
19-16

Table 19-7 File Directory Information

Description
The name of the file.
File types: Boot-Rom, Operation Code, and Config file.
Shows if this file is used when the system is started.
The length of the file in bytes.