Certification - Lenze 8400 StateLine C Hardware Manual

10 Safety engineering

Certification

10.7 Certification
The certification of drive−based safety in the controllers of the 8400 series is based on the
following test fundamentals:
EN ISO 13849−1
ƒ
EN 60204−1
ƒ
EN 50178
ƒ
EN 61800−3
ƒ
IEC 61508, part 1−7
ƒ
EN 62061
ƒ
EN 61800−5−2
ƒ
The function of the safety unit meets the requirements of the following standards:
Category 4 and PL e according to EN ISO 13849−1
ƒ
– To comply with category 4, the external wiring and the cable monitoring must
meet the requirements of category 4.
– Ensure that short circuits cannot occur in the external wiring.
SIL 3 according to IEC 61508
ƒ
– The safety unit does not contribute to the probability of failure on demand (PFD)
and probability of failure per hour (PFH) of IEC 61508.
I
Tip!
The "TÜV Rheinland Group" certificate is available on the Internet under:
http://www. Lenze.com
174
efesotomasyon.com - Lenze
l
EDS84ASC552 EN 6.0