6
Electrical installation
Devices in the power range 0.37 ... 22 kW (3/PE AC 400 V)
Terminal assignment of the power connections
6.4.2
Terminal assignment of the power connections
Preparing the cable installation
To connect the shield of the motor cable, use the shield lug of the rear shield sheet. Position
the shield sheet as follows:
1. Release the holding screw of the shield sheet.
2. Bring the shield sheet into the lock−in position.
3. Tighten the holding screw to lock the shield sheet.
Fig. 6−16
112
efesotomasyon.com - Lenze
Locate shield sheet in position
l
8400GG011
EDS84ASC552 EN 6.0