Q/Lcpu User File List - Mitsubishi Electric Melsec Q Series User Manual

5 WHEN USING FILE TRANSFER FUNCTIONS (FTP SERVER)

5.6.2 Q/LCPU user file list

Type
Parameters
Sequence program (
For programs
SFC program
Device comments (
Device initial values (
For device
File registers
Simulation data
Local device
Sampling trace data
Status latch data
For debugging
Program trace data
SFC trace data
For diagnosis Error history data
5 - 19
The user-created files (files that are/can be created by the user with a programming
tool) that can be designated for file transfer are described below:
File type File identifier
1
)
1
)
1
)
1 A password can be registered in program files, device comment files and device
initial value files of the designated memory (program memory/standard
ROM/memory card/SD memory card).
For passwords, see the User's Manual (Function Explanation, Program
Fundamentals) for the CPU module used.
2 The number of files that can be written with FTP is calculated with the following
formula:
(The maximum number of files that can be stored in the related drive) - 1
POINT
(1) Each memory of Q/LCPU does not have any sub-directory. Files are all stored in
the root directory.
(2) For the restrictions and details of the Q/LCPU user files, see the User's Manual
(Function Explanation, Program Fundamentals) for the CPU module used.
Drive that can store the file
(See section 5.6.1.)
1 (
0
QPA
QPG
QCD
QDI
QDR
QDS
QDL
QTD
QTL
QTP
QTR
QFD
MELSEC-Q/L
2 2
) 2 ( ) 4 (
3
:Can be stored
Remarks
2
)
1 file/1drive
—
Max. 124 files
—
1 file/CPU
—
—
: Cannot be stored
5 - 19