Mitsubishi Electric Melsec Q Series User Manual page 167

5 WHEN USING FILE TRANSFER FUNCTIONS (FTP SERVER)
5 - 34
passwd-wr (L series Ethernet module dedicated command)
[Function]
[Designation format]
[Designation example 1]
[Designation example 2]
[Designation example 3]
[Caution]
Sets the registered write password of the target file for file
transfer in the Ethernet module.
Or, display/clear the current write password set in the
Ethernet module.
Use this command only if a write password is registered in
the target file of file transfer.
The Ethernet module performs a password check when
the designated file is accessed.
quote passwd-wr [write password]
One of the following is displayed as the execution result for a
successful completion.
• When setting a write password: 200 Command successful
• When displaying a write password: 200 Write-password is
"write password"
• When clearing a write password: 200 Command successful
• When displaying a write password with the write password
not set: 200 Write-password is not set.
To set the write password (ABCD1234@efgh) to the Ethernet
module:
quote passwd-wr 1234@ABCDefgh
To display the write password currently set in the Ethernet
module:
quote passwd-wr
To clear the write password currently set in the Ethernet
module:
quote passwd-wr c or quote passwd-wr C
• One write password can be set in the Ethernet module. If
the target file for file transfer changes and a password is
registered in the file which is at the changed destination, set
the write password for the new target file in the Ethernet
module again.
• Upon login to the Ethernet module, the write password set
is initialized or cleared.
MELSEC-Q/L
5 - 34