Mitsubishi Electric Melsec Q Series User Manual page 158

5 WHEN USING FILE TRANSFER FUNCTIONS (FTP SERVER)
5 - 25
open
[Function]
[Designation format]
[Designation example 1]
[Designation example 2]
[Designation example 3]
[Designation example 4]
[Caution]
put
[Function]
[Designation format]
[Designation example 1]
[Designation example 2]
[Caution]
Connects to the FTP server by designating the host name or IP
address for the FTP server, along with the FTP login name and
password.
FTP server host name is displayed while connected to the
server.
open HOST NAME [user name [password]]
open IP ADDRESS [user name [password]]
Host name: Host name, domain name or synonym of the host
name
IP address: IP address of the Ethernet module
User name: FTP login name set during Ethernet module initial
processing
Password : Password set during Ethernet module initial
processing
(See Section 5.3 for the FTP login name and
password.)
To connect to the FTP server by designating the host name:
open HOST
To connect to the FTP server by designating the IP address:
open 192.0.1.254
To connect to the FTP server by designating the host name and
user name:
open HOST QJ71E71
To connect to the FTP server by designating the host name,
user name, and password:
open HOST QJ71E71 QJ71E71
• Normally, the connection can be established by designating
the FTP server IP address during FTP startup.
• When designating the domain name, the DNS environment
must be set using the network parameters on the FTP client
side.
• The password entered from the keyboard is not displayed on
the screen.
Writes a file to a CPU module.
put TRANSFER SOURCE FILE PATH [transfer destination
file path name]
To write the file MAINSEQ1.QPG to the RAM area of memory
card with same file name:
put MAINSEQ1.QPG 1:\MAINSEQ1.QPG
To write the file MAINSEQ.QPG file to the RAM area of memory
card with different file name:
put MAINSEQ.QPG 1:\MAINSEQ1.QPG
• When the directory is not designated for the transfer source
file path (FTP client), the file is written to the connected
current directory at FTP server startup connection.
• When the transfer destination file path (FTP server side) is not
designated, the file is stored to the memory where the
parameter file used for the current operation of a CPU module
is stored.
• See sections 5.5 and 5.6.1.
MELSEC-Q/L
5 - 25