Mitsubishi Electric Melsec Q Series User Manual page 53

2 USING THE E-MAIL FUNCTION
2 - 25
(4) Sending an e-mail from a personal computer
This section explains how to send e-mails from a PC/UNIX to the Ethernet
module.
After setting the environment where the Internet is accessible with a mail user
agent, create and send an e-mail on the sending message creation screen as
follows.
POINT
To send an e-mail to an Ethernet module, use a mail user agent where the
encoding method (Base 64/7 bits/8 bits/Quoted Printable) of attached files can be
specified.
New Message
Send
To:
Mail address of Ethernet module ••• (a)
Subject:
TESTMAIL
Attach:
01234567.bin (12 bytes)
(a) To
Designate the mail address of the Ethernet module.
(b) Subject
Designate the subject of the e-mail to be sent to the Ethernet module in
ASCII format.
(c) Main text
Do not designate data (the Ethernet module ignores it.)
(d) Attach file
Data can be sent as an attached file.
Send the attached file data as binary data.
The Ethernet module does not convert the received attached file data
from ASCII to binary.
(e) Attached file name
Designate the name of the attached file using alphanumeric characters. (It is
recommended to use the name within eight characters.) Designate either
".bin" or ".asc" for the attached file extension. The stored data will be
received as binary data.
REMARKS
Designate a single attached file when sending e-mail to the Ethernet module.
If two or more files are attached, the destination Ethernet module will store only the
first file and ignore the rest of the attached files.
••• (b)
••• (d)(e)
(c)
MELSEC-Q/L
2 - 25