Jp/Gp.swrite - Mitsubishi Electric Melsec Q Series User Manual

6 DEDICATED INSTRUCTIONS

6.11 JP/GP.SWRITE

Set
Internal device
data
Bit Word
(S1) —
(S2) —
(D1) —
(D2)
(D3)
The following format can be used only when the local station is a Universal model QCPU or an LCPU.
6 - 51
This instruction writes data to word devices of other stations.
Link direct device
File register J \
Bit
1
1 T, C, D, W, ST, SD or SW can be used.
For SD/SW, data can be written within the setting range allowed for the user.
For details on SD/SW, refer to the manual for the programmable controller
CPU or network module of the target station.
2 The SWRITE instruction can be programmed without argument (D3).
However, in such a case, the operation is identical to the WRITE instruction.
With the SWRITE instruction, different operations are available depending on
whether (D3) is omitted or not.
3 When the target station is a Basic model QCPU or safety CPU, the write
notification device set as argument (D3) for the target station is ignored. (Same
operation as with the WRITE instruction)
Applicable device
Intelligent
function module
device U \G
Word
MELSEC-Q/L
Index register Constant
Zn K, H
—
—
—
—
—
Others
6 - 51